CenturaHeat 4 Person Canadian Hemlock Indoor Sauna with Stone Back Wall and 6kW Harvia Heater

Create a distinctive traditional sauna space at home with this four-person Canadian hemlock indoor sauna. The 1800 × 1500mm cabin combines a full-height glazed front, a decorative stone-effect back wall and a two-tier bench layout with a side return for flexible seating.

The sauna is supplied with a Harvia BC60E 6kW electric sauna heater, sauna stones, an external control panel and top-mounted single-colour LED ambient lighting.

What This Product Is

This is a rectangular, panel-built indoor traditional steam sauna manufactured from Canadian hemlock. The decorative stone-effect feature wall creates a contrasting interior finish, while the Harvia heater warms the cabin air and sauna stones for classic high-temperature sauna sessions, including controlled steam and humidity when water is applied in accordance with the heater instructions.

Capacity and Dimensions

Capacity: Up to 4 people
External Dimensions: 1800mm wide × 1500mm deep × 2000mm high

The rear two-tier bench and side-return seating provide multiple seating levels within the cabin. The stated four-person capacity is based on the illustrated seating arrangement rather than a supplier-stated occupancy rating.

Installation Environment

This model is intended for indoor use only. Install it on a dry, firm and completely level floor in a well-ventilated indoor area. It must not be installed outdoors or exposed to rain, standing water or persistent damp.

Power and Electrical Requirements

Heater: Harvia BC60E external sauna heater
Voltage: 230V
Rated Power: 6000W
Amperage: 32A
Connection: Hardwired mains connection

The heater, external controller, circuit protection, isolation, cabling and final electrical connection must be specified, installed and tested by a qualified electrician. The sauna is not supplied as a plug-and-play appliance.

Heating System Overview

The included Harvia BC60E 6kW heater provides traditional sauna heat for the cabin. The external control panel allows the heating system to be operated separately from the stove, while the ceiling lighting provides ambient illumination during use.

Key Features

• Spacious indoor traditional steam sauna
• Up to four-person seating layout
• Canadian hemlock timber construction
• Decorative stone-effect feature wall
• Harvia BC60E 6kW sauna heater included
• External sauna control panel included
• Traditional dry heat and steam sauna operation
• Two-tier rear bench with side-return seating
• Full-height glazed front and entrance door
• Top-mounted single-colour LED ambient lighting
• Ceiling ventilation opening
• Panel-built construction for on-site assembly

Parts Included

• Canadian hemlock sauna cabin panels and floor
• Decorative stone-effect rear feature panel
• Harvia BC60E 6kW electric sauna heater
• External sauna control panel
• Sauna stones
• Two-tier timber bench seating, side return and backrest
• Full-height glazed front, entrance door and timber handle
• Timber heater guard
• Top LED ambient lighting
• Assembly hardware and fittings

Assembly and Setup

The sauna is supplied in panel sections for assembly on site. Assembly involves joining the wall panels, fitting the floor, benches, backrest, decorative rear panel, glazed front, ceiling and heater. The supplier instructions specify two or more people for lifting and securing the heavy glazed front. Exterior-grade glass sealant must be purchased locally for installation because it is not transported with the sauna. Electrical work must be completed by a qualified electrician.